Managed Learning Programme (MLP)
Duration: 2 days a week for 20 weeks
Cost: £3500
This course is for new entrants and covers stages required in order to get you to the point of registering with Gas Safe.
The course will cover the following topics:
Safety, legislation and standards
Gas emergency actions and procedures
Products and characteristics of combustion
Ventilation for domestic gas burning appliances
Installation of pipework and fittings (including copper/low carbon steel bending and jointing)
Checking and setting appliance burner pressures and gas rates
Re-establish existing gas supply and re-light appliances
Checking and/or setting meter regulators
Unsafe situations, emergency notices and warning labels
Chimney standards, installation, inspection and testing
Operation and checking of appliance gas safety devices and controls
Tightness testing and purging
Operation and positioning of emergency isolation controls and valves
LPG
Renewal
Duration: 2 days
Cost: £300
Initial
Duration: 3 days
Cost: £500
CCLP1
Core LPG Safety
CCLP1 RPH Residential Park Homes & LAV Leisure Accommodation Vehicles
This course is for experienced gas engineers. You must be able to satisfy the requirements of the ACS Scheme Rules.
The course will cover the following topics:
Gas Safety (Installation & Use) Regulations 1998
Relevant Health & Safety Regulations
RIDDOR
Properties and characteristics of LPG
Complete and incomplete combustion
Gas storage
Tightness testing procedures
Gas input rating
Ventilation requirements
Open, closed and balanced flues
Dealing with unsafe situations
CCLP1 B (Boats)
This course is for experienced gas engineers. You must be able to satisfy the requirements of the ACS Scheme Rules.
The course will cover the following topics:
Gas Safety (Installation & Use) Regulations 1998
Relevant Health & Safety Regulations
RIDDOR
Properties and characteristics of LPG
Complete and incomplete combustion
Gas storage
Tightness testing procedures
Gas input rating
Ventilation requirements
Open, closed and balanced flues
Dealing with unsafe situations
LPG
Renewal
Duration: 2 days
Cost: £300
Initial
Duration: 3 days
Cost: £500
CCLP1
Core LPG Safety
CCLP1 RPH Residential Park Homes & LAV Leisure Accommodation Vehicles
This course is for experienced gas engineers. You must be able to satisfy the requirements of the ACS Scheme Rules.
The course will cover the following topics:
Gas Safety (Installation & Use) Regulations 1998
Relevant Health & Safety Regulations
RIDDOR
Properties and characteristics of LPG
Complete and incomplete combustion
Gas storage
Tightness testing procedures
Gas input rating
Ventilation requirements
Open, closed and balanced flues
Dealing with unsafe situations
CCLP1 B (Boats)
This course is for experienced gas engineers. You must be able to satisfy the requirements of the ACS Scheme Rules.
The course will cover the following topics:
Gas Safety (Installation & Use) Regulations 1998
Relevant Health & Safety Regulations
RIDDOR
Properties and characteristics of LPG
Complete and incomplete combustion
Gas storage
Tightness testing procedures
Gas input rating
Ventilation requirements
Open, closed and balanced flues
Dealing with unsafe situations
LPG
Renewal
Duration: 2 days
Cost: £300
Initial
Duration: 3 days
Cost: £500
CCLP1
Core LPG Safety
CCLP1 RPH Residential Park Homes & LAV Leisure Accommodation Vehicles
This course is for experienced gas engineers. You must be able to satisfy the requirements of the ACS Scheme Rules.
The course will cover the following topics:
Gas Safety (Installation & Use) Regulations 1998
Relevant Health & Safety Regulations
RIDDOR
Properties and characteristics of LPG
Complete and incomplete combustion
Gas storage
Tightness testing procedures
Gas input rating
Ventilation requirements
Open, closed and balanced flues
Dealing with unsafe situations
CCLP1 B (Boats)
This course is for experienced gas engineers. You must be able to satisfy the requirements of the ACS Scheme Rules.
The course will cover the following topics:
Gas Safety (Installation & Use) Regulations 1998
Relevant Health & Safety Regulations
RIDDOR
Properties and characteristics of LPG
Complete and incomplete combustion
Gas storage
Tightness testing procedures
Gas input rating
Ventilation requirements
Open, closed and balanced flues
Dealing with unsafe situations
LPG
Renewal
Duration: 2 days
Cost: £300
Initial
Duration: 3 days
Cost: £500
CCLP1
Core LPG Safety
CCLP1 RPH Residential Park Homes & LAV Leisure Accommodation Vehicles
This course is for experienced gas engineers. You must be able to satisfy the requirements of the ACS Scheme Rules.
The course will cover the following topics:
Gas Safety (Installation & Use) Regulations 1998
Relevant Health & Safety Regulations
RIDDOR
Properties and characteristics of LPG
Complete and incomplete combustion
Gas storage
Tightness testing procedures
Gas input rating
Ventilation requirements
Open, closed and balanced flues
Dealing with unsafe situations
CCLP1 B (Boats)
This course is for experienced gas engineers. You must be able to satisfy the requirements of the ACS Scheme Rules.
The course will cover the following topics:
- – Gas Safety (Installation & Use) Regulations 1998
- – Relevant Health & Safety Regulations
- – RIDDOR
- – Properties and characteristics of LPG
- – Complete and incomplete combustion
- – Gas storage
- – Tightness testing procedures
- – Gas input rating
- – Ventilation requirements
- – Open, closed and balanced flues
- – Dealing with unsafe situations
LPG
Renewal
Duration: 2 days
Cost: £300
Initial
Duration: 3 days
Cost: £500
CCLP1
Core LPG Safety
CCLP1 RPH Residential Park Homes & LAV Leisure Accommodation Vehicles
This course is for experienced gas engineers. You must be able to satisfy the requirements of the ACS Scheme Rules.
The course will cover the following topics:
Gas Safety (Installation & Use) Regulations 1998
Relevant Health & Safety Regulations
RIDDOR
Properties and characteristics of LPG
Complete and incomplete combustion
Gas storage
Tightness testing procedures
Gas input rating
Ventilation requirements
Open, closed and balanced flues
Dealing with unsafe situations
CCLP1 B (Boats)
This course is for experienced gas engineers. You must be able to satisfy the requirements of the ACS Scheme Rules.
The course will cover the following topics:
Gas Safety (Installation & Use) Regulations 1998
Relevant Health & Safety Regulations
RIDDOR
Properties and characteristics of LPG
Complete and incomplete combustion
Gas storage
Tightness testing procedures
Gas input rating
Ventilation requirements
Open, closed and balanced flues
Dealing with unsafe situations
LPG
Renewal
Duration: 2 days
Cost: £300
Initial
Duration: 3 days
Cost: £500
- CONGLP1
Changeover natural gas to LPG
RPH Residential Park Homes & LAV Leisure Accommodation Vehicles
This course is for experienced gas engineers. You must hold a natural gas ACS qualification CCN1 or COLPNG1
The course will cover the following topics:
Gas Safety (Installation & Use) Regulations 1998 (pertaining to LPG)
Relevant Health & Safety Regulations
Properties and characteristics of LPG
Safe handling
Gas storage
Pressure, regulators and associated LPG controls
Standing and operating pressure
LPG pipework and flexible hoses
Tightness testing procedures
Bulk storage supplies
Cylinder supplies
Dealing with unsafe situations
B Boats
CONGLP1 – Natural Gas to LPG Changeover
This course is for experienced gas engineers. You must a natural gas ACS qualification CCN1 or COLPNG1
The course will cover the following topics:
Gas Safety (Installation & Use) Regulations 1998 (pertaining to LPG)
Relevant Health & Safety Regulations
Properties and characteristics of LPG
Safe handling
Gas storage
Pressure, regulators and associated LPG controls
Standing and operating pressure
LPG pipework and flexible hoses
Tightness testing procedures
Bulk storage supplies
Cylinder supplies
Dealing with unsafe situations-
Boiler Fault Finding
Duration: 1 day
Cost: £210
This course is suitable for Gas Safe registered engineers, or who have undertaken Gas Managed Learning Programme, who are looking to enhance their skills with knowledge on boiler maintenance, fault finding and repair.
The course will cover the following topics:
Multimeter training
Electrical Safety tests
Testing fans
Testing switches
Testing pumps
Fan switches
Expansion Vessels
Domestic Heat Exchangers
Temperature sensors and stats
Diverter Valves
Domestic Hot Water Storage Systems & Safety
(Including Unvented hot water)
Renewal
Duration: 1 day
Cost: £210
Initial
Duration: 2 days
Cost: £350
This course is for installers who want to install Domestic Hot Water Storage Systems and join a Competent Persons’ Scheme which will allow the self-certification of installations.
The course will cover the following topics:
Health & Safety
Regulations
Unvented hot water systems and their operating principles
Design and Installation
Components and function
Safety controls
Servicing and maintenance
Other applicable building regulations
Heating Control Wiring course
Duration: 1 day
Cost: £210
This course is for wiring and fault finding heating controls
The course will cover the following topics:
- – S-plan
- – Y-Plan
- – S-plan plus
- – Frost stats
- – Programmers
- – Cylinder stats
- – Wiring live
- – Smart stats
Commercial Gas course (changeover)
Duration: 2 weeks
Cost: £3500
The course will cover the following topics:
- – Safety, Legislation and Standards
- – Pressure and Flow
- – Flues and Ventilation
- – Combustion and gas Safety Controls
- – Soundness Testing and Purging
- – Flue Analysis
- – Burner Controls and Control Systems
- – Industrial Pipe work
- – Industrial and Commercial Gas Fired Appliances
All our trainers are qualified and certified
